spec no: dsaj8710 rev no: v.6b date: may/06/2015 page: 1 of 5 approved: wynec checked: allen liu drawn: q.m.chen e rp: 1203010213 1.6x0.8mm smd chip led lamp (0.25mm height) attention observe precautions for handling electrostatic discharge sensitive devices part number: apg1608qbc/g blue notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.1(0.004") unless otherwise noted. 3. the specifications, characteristics and technical data descri bed in the datasheet are subject to change without prior notice . 4. the device has a single mounting surface. the devi ce must be mounted according to the specifications. features z 1.6mmx0.8mm smt led, 0.25mm thickness. z low power consumption. z wide viewing angle. z compatible with automatic placement equipment. z ideal for backlight and indicator. z package: 2000pcs / reel. z moisture sensitivity level : level 3. z rohs compliant. package dimensions applications 1.mobile phone keypad indicator and backlight. 2.flat backlight for lcd, switch and symbol. 3.toys. descriptions z the blue source color devices are made with ingan light emitting diode. z electrostatic discharge and power surge could damage the leds. z it is recommended to use a wrist band or anti- electrostatic gl ove when handling the leds. z all devices, equipments and machineries must be electrically grounded.
spec no: dsaj8710 rev no: v.6b date: may/06/2015 page: 2 of 5 approved: wynec checked: allen liu drawn: q.m.chen e rp: 1203010213 selection guide absolute maximum ratings at ta=25c electrical / optical characteristics at ta=25c note: 1. 1 / 10 duty cycle, 0.1ms pulse width. part no. dice lens type v iewing angle [1] min. typ. 2 1/2 apg1608qbc/g blue (ingan) water clear 80 200 120 iv (mcd) [2] @ 20ma symbol parameter device typ. max. units test conditions peak peak wavelength blue 461 nm i f =20ma d [1] dominant wavelength blue 465 nm i f =20ma ? 1/2 spectral line half-width blue 25 nm i f =20ma c capacitance blue 100 pf v f =0v;f=1mhz v f [2] forward voltage blue 3.3 4 v i f =20ma i r reverse current blue 50 ua v r =5v parameter blue units power dissipation 120 mw dc forward current 30 ma peak forward current [1] 150 ma reverse voltage 5 v operating temperature -40c to +85c storage temperature -40c to +85c electrostatic dischar ge threshold (hbm) 250 v notes: 1. 1 / 2 is the angle from optical centerline where the lumi nous intensity is 1 / 2 of the optical peak value. 2. luminous intensity / luminous flux: + / -15%. 3. luminous intensity value is traceable to the cie127-2007 compliant national standards. notes: 1. wavelength: + / -1nm. 2. forward voltage: + / -0.1v. 3. wavelength value is traceable to the cie127-2007 compliant national standards. 4. excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradat ion or premature failure.
spec no: dsaj8710 rev no: v.6b date: may/06/2015 page: 3 of 5 approved: wynec checked: allen liu drawn: q.m.chen e rp: 1203010213 blue apg1608qbc/g
spec no: dsaj8710 rev no: v.6b date: may/06/2015 page: 4 of 5 approved: wynec checked: allen liu drawn: q.m.chen e rp: 1203010213 apg1608qbc/g reflow soldering is recommended and the soldering profile is shown below. other soldering methods are not recommended as they might cause damage to the product. recommended soldering pattern (units : mm; tolerance: 0.1) reel dimension tape dimensions (units : mm)
spec no: dsaj8710 rev no: v.6b date: may/06/2015 page: 5 of 5 approved: wynec checked: allen liu drawn: q.m.chen e rp: 1203010213 packing & label specifications apg1608qbc/g terms and conditions for the usage of this document 1. the information included in this docum ent reflects representative usage scenarios and is intended for technical reference on ly. 2. the part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. before production usage customer should refer to the latest datasheet for the updated specifications. 3. when using the products referenced in this document, please make sure the produc t is being operated within the environmental and electrical limits specified in the dat asheet. if customer usage exceeds the spec ified limits, kingbright will not be respon sible for any subsequent issues. 4. the information in this document applies to typical usage in consumer electronics applicati ons. if customer's application ha s special reliability requirements or have life-threatening liabilitie s, such as automotive or m edical usage, please consult with kingbright representative for further assistance. 5. the contents and information of this document may not be reproduced or re-transmitted without permission by kingbright. 6. all design applications should refer to kingbright application notes available at http://www.kingbrightusa.com/applicationnotes
|
